If you would like some Hoses for your Scimitar go to

Click on Logo or picture to be taken to Silicon Hoses.

They do lots of stuff for many makes and models although do not do complete kits as with the Scimitar SE5a.

They only have Hoses for a SE5a not other Scimitars. I have fitted some to my Scimitar SE5a and very good they are.

One thing to note, These Hoses are thinner than normal Rubber Hoses so if you have any Jubilee clips that are just about the correct size, i.e. the clips are tightened to almost the ends of the thread when fitted to normal Rubber Hoses they will not tighten enough on the Silicon Hoses. So best to check. Also I had difficulty getting some hoses to seal watertight on a couple of connections. Do not tighten to much as I had great difficulty getting some hoses water tight. By undoing, leaving overnight and tightening less gave a water tight seal and make sure that the area the hoses are being fitted to is clean and smooth.

What you get can be seen below.